- Mirror Colour: Silver Mirror
- Mirror Size: Width 900mm, Height 450mm
- Mirror Thickness: 5mm
Step 1. Prepare the back of the bathroom mirror
Before you begin, remove any dirt and grime from the wall with some cleaning fluid and a soft cloth. Then stick some strips of double-sided tape on the back of the mirror. Add a few beads of silicone between the tape for added strength.
Step 2. Mark out the position for the bathroom mirror on the wall.
Most people like to position the mirror above the vanity. Once you’ve chosen your position, use your pencil and level to mark out where you want the side and bottom edges of the mirror to be. In this case, we’ve lined up the outside edge of the mirror with the side of our vanity unit. We then set the mirror height so that it sits squarely in the middle of the tiles.
Step 3. Install the bathroom mirror on the wall
Stack some packing blocks up, level with the bottom edge you marked on the wall. To give the blocks some stability, you can stick them to the wall with masking tape. Then remove the backing from the double-sided tape on the mirror. Rest the base of the mirror on the packing blocks and pivot it into position on the wall. Push gently against the glass, starting in the centre and working out towards the edges. This will spread the silicone and improve the bond. Finish by sticking some tape in the corners, and give the silicone 24 hours to set properly.